Product Specifications & Features

LT Control Panels can be engineered in different configurations depending on the electrical design. Common features include:

• Single or multiple incoming feeders
• ACB or MCCB-based incomer protection
• Multiple outgoing feeder arrangements
• Copper or aluminium busbars
• Digital multifunction meters
• CT-operated metering
• Short-circuit and overload protection
• Under-voltage and other protection functions where required
• Bus coupler arrangements
• Indication lamps and selector switches
• Emergency stop/control circuits where applicable
• Cable alley and gland plate arrangements
• Provision for future feeder additions
• Suitable earthing and internal wiring arrangements

Typical Technical Parameters

Parameter	Typical Specification
Application	Low-voltage power distribution & control
System Voltage	Commonly 415 V AC, 3 Phase, 4 Wire
Frequency	50 Hz
Incomer	ACB / MCCB
Outgoing Feeders	MCCB / MCB / other suitable devices
Busbar Material	Copper / Aluminium
Control Voltage	24 V DC / 110 V AC / 230 V AC, as required
Enclosure Material	Fabricated sheet steel
Protection	Overload, short circuit and application-specific protection
Metering	Ammeter, voltmeter, multifunction meter, energy meter
Installation	Indoor / Outdoor, according to design
Cable Entry	Top / Bottom, as required
Enclosure Protection	IP rating selected according to installation conditions
Assembly Standard	Applicable IEC 61439 requirements

Key Reasons to Choose This Product

LT Control Panels are useful when an electrical system requires centralised control over several low-voltage feeders. Instead of installing independent protection equipment throughout a facility, a properly engineered panel can bring major distribution and control functions into an organised assembly.

Key advantages include:

• Centralised electrical distribution
• Improved organisation of outgoing feeders
• Easy access to switching and protection devices
• Flexible feeder configuration
• Convenient monitoring through panel meters
• Simplified maintenance and fault identification
• Provision for system expansion
• Suitable integration with industrial electrical networks
• Compatibility with different protection and control arrangements

Material & Construction Details

The enclosure of an LT Control Panel is generally fabricated from suitably thick sheet steel and designed around the equipment arrangement. Depending on the project, the panel may include separate compartments for incoming breakers, busbars, outgoing feeders and control equipment.

The internal arrangement can incorporate insulated busbar supports, cable chambers, removable gland plates, terminal blocks and dedicated earthing connections. Components are selected according to electrical ratings and the intended duty of the panel.

For outdoor applications, the enclosure and finishing system can be specified according to exposure conditions, while indoor panels can be configured for the environmental conditions of the installation area.

Quality Assurance and Testing Standards

Quality assurance is an important part of LT panel manufacturing because the assembly must perform reliably under its specified electrical and environmental conditions.

Depending on the applicable assembly design and project requirements, testing and verification can address areas such as:

• Verification of construction and component installation
• Clearance and creepage requirements
• Protective circuit continuity
• Dielectric properties
• Temperature-rise performance
• Short-circuit withstand capability
• Mechanical operation
• Degree of protection of the enclosure
• Functional operation of control and indication circuits

IEC 61439 uses design verification and routine verification concepts to demonstrate that low-voltage assemblies meet applicable requirements.

Where This Product Performs Best

LT Control Panels can be incorporated into electrical systems across a wide range of facilities.

• Manufacturing & Industrial Plants

Used for distributing power to production machinery, motors, auxiliary systems and plant services.

• Commercial Buildings

Suitable for electrical distribution in offices, shopping complexes, hotels and large commercial premises.

• Infrastructure Projects

Can be integrated into electrical systems for transportation, utilities and large development projects.

• Water & Pumping Facilities

Useful for controlling and distributing power to pumps, treatment equipment and auxiliary systems.

• Process Industries

Suitable for plants requiring organised feeder protection and centralised electrical control.

• Solar & Renewable-Energy Systems

Can be incorporated into suitable AC distribution arrangements associated with solar power installations.

Why Choose Sohum Industrial Sales Corporation?

Sohum Industrial Sales Corporation supplies LT Control Panels for customers requiring organised low-voltage power distribution and control solutions.

The company caters to requirements across West Bengal, Kolkata, Odisha, Chhattisgarh, Bihar, Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Tripura, Bhutan.

Customers can specify their requirements based on load capacity, number of feeders, incoming supply, breaker arrangement, metering, enclosure configuration and installation conditions, allowing the panel configuration to be aligned with the actual electrical system.

Why This Product is the Right Choice

An LT Control Panel becomes especially valuable when a facility has multiple electrical loads that need to be distributed, protected and monitored from a structured central point.

With appropriate breaker selection, busbar sizing, protection coordination, metering and enclosure design, an LT panel can provide a practical foundation for organised low-voltage electrical distribution.

For industrial plants, commercial buildings, infrastructure projects and other facilities requiring dependable LT power management, Sohum Industrial Sales Corporation offers LT Control Panel supply support across eastern and northeastern India.